Performance Engineered Lubricants - Since 1919
   
 




   

industrial lubricantsD-A Industrial Lubricants

D-A Lubricant Company industrial lubricants offers a diverse selection of high quality products: Petroleum, Synthetics and Food Quality. Developed with application specific formulas, D-A has once again exceeded customer expectations with forward-thinking tribology.

D-A Lubricant Company developed ChemGuard™, an innovative additive package technology that augments formula design to perform beyond the competition. Whether it is a food grade H-1, non-food grade H-2, or a specialty product, D-A has the advanced chemistry to serve your industrial lubricant needs.

Petroleum

Synthetics

Food Quality





Petroleum
D-A industrial petroleum products are formulated to meet the needs of the most demanding applications. These lubricants are blended with our advanced proprietary ChemGuard™ additive technology, enhancing our high quality base oils to perform superior characteristics.

Hydraulic Oil
D-A PresurFlo™
Formulated for use in all modern high pressure hydraulic systems where the manufacturer recommends the use of an AW fluid. Available in two multi-viscosity grades to make equipment operate more efficiently and without the performance drop-off often experienced with mono-grade products in high ambient temperatures. - More info

D-A HydraSafeFR
Specially designed, readily biodegradable, fire resistant hydraulic fluid for use in monitored or environmentally sensitive heavy-duty applications. Vigorous EP/Anti-wear inhibitors resulting in wear control around steel, brass, and bronze parts. Exceptional anti-rust and anti-oxidation additive has been included to significantly limit rusting of ferrous and corrosion of yellow metals. Improves demulsification, provides hydrolytic stability and greatly reduces foaming in a zinc and calcium free formula. Utilized most in mobile or stationary hydraulic systems, agriculture, forestry, mining, dredging, off-shore platforms, tunneling, waste management etc. - More info

D-A R & O Oil
Designed for all modern hydraulic power systems where an R&O oil is permitted. Formulated with a high level of R&O inhibitors for maximum protection against rust and oxidation in hydraulic pumps and motors. Also provides superior service in industrial gear applications requiring rust and oxidation (R&O) inhibited lubricants. - More info

Gear Oil
D-A GTD
Petroleum gear oil recommended for gear systems where moderate loads and high temperatures are expected, including worm gears containing soft metals such as bronze, brass and copper. - More info.

Chain Oil
D-A GTD™ Chain Oil
A petroleum based chain oil that exceeds H-2 food quality standards for general purpose in conveyor roller ball bearing chains, pin and roller chains, slides and gear applications.
- More info.

D-A Bar & Chain Oil
Formulated to insure good performance on all link chain and chain bars including chain saw bars. Extends the life of the bar, chain and sprocket by protecting against wear. Formulated with high levels of tackifier additive to resist dripping and throw-off. Prevents rusting and reduces friction and heat build-up on cutting chain and guide bar. Anti-wear agents reduce metal-to-metal contact wear between the drive sprocket, the bar guide and the moving chain. - More info.

Grease
D-A RedPlex™
Lithium #00, 0, 1, 2 – Petroleum - More info.

D-A MultiPlex™
Lithium Complex #1, 2 – Petroleum - More info.

D-A Thermoplex
Calcium Complex #2 – Petroleum - More info.

D-A Open Gear All Seasons
Lithium #3 - More info.

D-A PentaPlex™,
Calcium Complex #2 - More info.

Circulating Oil
D-A Circulating Oil
Environmentally friendly zinc and phenol free. Exceptional rust and oxidation resistance and anti-wear performance is achieved by a robust additive package. Specifically designed to meet Morgoil® Advanced Lubricant (Super Demulsibility) specifications for their bearings.
- More info.

Heat Transfer Oil
D-A Heat Transfer Oil
Used in heat transfer systems requiring a mineral oil as a medium for storing and transferring heat. Excellent natural temperature stability when subjected to the temperatures encountered in most heater systems. Provides the required temperature stability with a minimum of coking. - More info.

Way Lubricant
D-A Way Lube
Manufactured with extreme pressure, tackiness, and friction modifying additives. Provides superior slip-stick protection to ensure smooth and consistent movement for optimum surface finish. Exhibits excellent separation from coolants. Easy removal for reuse and reduces susceptibility for bacteria growth in coolant sumps. - More info.

Compressor Oil
WearGuardD-A SYN 1000 Series
Formulated specifically for higher temperature service in rotary screw air compressors. The exclusive petroleum additive technology system exhibits superior oxidation and thermal stability for longer fluid life at higher operating temperatures. - More info.


synthetic lubricantsSynthetics

Hydraulic Fluid

WearGuard
D-A SYN FQH Series

A food quality hydraulic oil that is NSF approved and exceeds H-1 standards. This synthetic multi-purpose oil is blended from 100% synthetic hydrocarbon (PAO) base oils. Engineered specifically for severe hydraulic system applications using high pressure and high output pumps. - More info.

Gear Lubricant
WearGuardD-A SYN 5000 Series
Designed from synthesized hydrocarbon fluid (PAO) for enclosed gear and bearing systems requiring ashless antioxidants, antiwear and EP additive systems. Recommended for gear systems where moderate loads and high temperatures are expected, including worm gears containing soft metals such as bronze, brass and copper. Also used as multipurpose oils in such applications as vacuum pumps, compressors and hydraulic systems. - More info.

WearGuardD-A SYN 6000 Series
Formulated from PAO synthetic fluids for enclosed gear systems requiring ashless antioxidants, antiwear and mild EP additive systems. Recommended for gear systems where moderate loads and high temperatures are expected, including worm gears containing soft metals such as bronze, brass and copper. Also used as multipurpose oil in such applications as vacuum pumps, compressors and hydraulic fluids. - More info.

WearGuardD-A SYN FQG Series
A 100% synthetic hydrocarbon (PAO), food quality NSF approved, H-1 gear oil. Engineered with a substantial anti-wear package and has a wide temperature operating range and is designed for with gear sets, bearings, as a circulating oil and chain lubricant. - More info.

Chain Oil
WearGuardD-A SYN Hi-Temp Chain Oil
A high temperature synthetic POE lubricant that exceeds H-2 food quality standards for conveyor roller ball bearing chains, pin and roller chains, slides and gears that operate in high temperature oven environments. - More info.

WearGuard
D-A SYN FQL Hi-Temp Chain Oil
A food grade NSF approved, and exceeds H-1 food quality standards, high temperature POE synthetic chain oil. It is formulated anti-wear additives, oxidation inhibitors and is very stable at extreme high temperatures. - More info.

WearGuardD-A SYN FQL Proofer Chain Oil
A synthetic ester lubricant that is designed for conveyor roller ball bearing chains, pin and roller chains, slides and gears that operate inside high humid food processing equipment and bakery proofer box applications. - More info.

Grease
WearGuardD-A FQM, Calcium Sulfonate Complex #0, 1, 2 – Synthetic
A multi-purpose NSF approved PAO-based grease is excellent for use in a wide variety of industrial applications, especially where FDA/USDA regulations specify H-1 grease for “incidental food contact”. These greases provide long life, wide operating temperature range, very high load carrying capacity, excellent water washout, and anti-corrosion properties. - More info.

Compressor Oil
WearGuardD-A SYN 2000
Under normal operating conditions you can expect extended drain cycles and experience 6,000 hours+ of use in rotary screw and rotary vane compressors. Series is based on a very thermally and oxidative stable PAO base oil for use in a wide variety of air compressors. It is widely used where maximum seal, paint, plastic, and rubber compatibility is required and is formulated to resist varnish under high temperature applications and minimize impact from airborne contaminants. - More info.

WearGuardD-A SYN 3000 Series
A premium Group III synthetic fluid formulated to exceed the demanding lubrication requirements of oil flooded rotary vane, screw and reciprocating type compressors. This combination is superior in oxidation and thermal degradation resistance - providing the potential for extended drain intervals, fewer air filter changes and less oil carryover. - More info.

WearGuardD-A SYN 4000
Formulated with diester base oil for use in rotary vane, sliding vane, and reciprocating compressors or vacuum pumps. Scheduled changes can be extended to 4,000-8,000 hours for sump pumps and crankcases. - More info.

WearGuardD-A SYN 7000 Series
Developed from a unique blend of polyglycol and pentaerythritol esters, together form an exceptional coolant and act to reduce oxidation and deposit formation. Offers excellent extreme pressure, heat transfer properties, long life, high flash points, low evaporation, low volatility, and excellent hydrolytic stability. They do not form varnish deposits like petroleum or PAO oils. - More info.

WearGuardD-A SYN 8000-S
A synthetic oil that is soluable with water a polyglycol-based, designed for use in compressors, vacuum pumps, enclosed gears, bearings, and other applications where the unique properties of these fluids are necessary. - More info.

WearGuardD-A SYN 8000-I
A synthetic oil that is insoluable with water and polyglycol-based, designed for use in compressors and vacuum pumps compressing polar gases, such as NH3, CO2, and propane. Offers excellent rust resistance and are excellent in wet gas compression. - More info.

WearGuardD-A SYN 9068
Specifically designed for use in compressor/airbrake systems. Has an exceptionally long life, oxidation stability and fortified for anti-wear. Operate in a wide temperature range. - More info.

WearGuardD-A X-tended Hour SYN FQC
This new proprietary food quality NSF approved, H-1 compressor oil extends oil life and load carrying capability without exceeding TAN (total acid number) or viscosity limits in rotary screw, rotary vane and reciprocating compressors. It offers significantly improved wear protection, oxidative stability and lubricity. - More info.

Turbine Oil
D-A Turbine Oil SG

D-A Turbine Oil SG is a custom-blended polyalphaolefin (PAO) synthetic hydrocarbon fluid compatible with the seals and elastomers found in steam and gas turbines. - More info.

Air Tool
WearGuardD-A FQL Air Tool
A fully-formulated food quality air tool oil that is NSF approved and exceeds H-1 standards. This high performance product provides exceptional emulsability, antioxidant and anti-wear properties to lubricate all air line equipment used in food-processing plants- More info.

Blower Oil
WearGuardD-A SYN Blower Oil
A synthetic PAO lubricant designed to provide excellent performance in all types of positive displacement blowers. Greatly increased thermal and oxidative stability over petroleum oils and also provides anti-wear properties. - More info.

Specialty Lubricant
WearGuard
D-A FQL CVO (Cooker Valve Oil)
Designed for use in industrial peelers, cookers and sterilizers where high temperatures and high humidity may be present. This NSF approved, food quality H-1 oil provides protection for operating valves, bearings and slide ways in wet food applications. - More info.
.
WearGuardD-A SYN FQL CSO Series (Canning/Seamer)
This premium food quality NSF approved product exceeds H-1 standards and is fully synthetic. Engineered to meet the extreme applications such as acidic conditions, steam, and water wash downs. Specially designed to be used with canning and seaming equipment and like industry related applications. - More info.

WearGuardSYN FQL PHP Lube (Peristaltic Hose Pump)
Glycerin based food quality lubricant that meets H-1 standards for peristaltic hose pumps. Has long life properties with a wide operating temperature range and significantly reduces friction between hoses and pump shoes. - More info.

Back to top




food lquality lubricantsFood Quality Lubricants

Air Tool
WearGuardD-A FQL Air Tool
A fully-formulated food quality air tool oil that is NSF approved and exceeds H-1 standards. This high performance product provides exceptional emulsability, antioxidant and anti-wear properties to lubricate all airline equipment used in food-processing plants. - More info.

Hydraulic Fluid
WearGuardD-A FQH WO Series
A hydraulic white oil that is NSF approved, and exceeds H-1 food quality standards. Engineered specifically for severe hydraulic system applications using high pressure and high output pumps. - More info.

WearGuardD-A SYN FQH Series
A food quality hydraulic oil that is NSF approved and exceeds H-1 standards. This synthetic multi-purpose oil is blended from 100% synthetic hydrocarbon (PAO) base oils. Engineered specifically for severe hydraulic system applications using high pressure and high output pumps. - More info.

Gear Lubricant
WearGuardD-A FQG WO Series
NSF approved gear white oil, exceeds H-1 food quality standards. Engineered specifically for all application encountered. R&O / A/W - More info.

WearGuard
D-A SYN FQG Series
A 100% synthetic hydrocarbon (PAO), food quality NSF approved, H-1 gear oil. Engineered with a substantial anti-wear package and has a wide temperature operating range and is designed for with gear sets, bearings, as a circulating oil and chain lubricant. - More info.



Chain Oil
WearGuard
D-A SYN FQL Hi-Temp Chain Oil
A synthetic POE food grade high-temperature chain oil that exceeds H-2 food quality standards. It is formulated anti-wear additives, oxidation inhibitors and is very stable at extreme high temperatures. - More info.

WearGuardD-A SYN FQL Proofer Chain Oil
A synthetic ester lubricant that is designed for conveyor roller ball bearing chains, pin and roller chains, slides and gears that operate inside high humid food processing equipment and bakery proofer box applications. - More info.

Grease
WearGuardD-A FQM Series - Calcium Sulfonate Complex
A multi-purpose NSF approved PAO-based grease is excellent for use in a wide variety of industrial applications, especially where FDA/USDA regulations specify H-1 grease for “incidental food contact”. These greases provide long life, wide operating temperature range, very high load carrying capacity, excellent water washout, and anti-corrosion properties. - More info.

Compressor Oil
WearGuardD-A X-tended Hour SYN FQC
This new proprietary food quality NSF approved, H-1 compressor oil extends oil life and load carrying capability without exceeding TAN (total acid number) or viscosity limits in rotary screw, rotary vane and reciprocating compressors. It offers significantly improved wear protection, oxidative stability and lubricity. - More info.

Specialty Lubricant
WearGuard
D-A FQL CVO (Cooker Valve Oil)
Designed for use in industrial peelers, cookers and sterilizers where high temperatures and high humidity may be present. This NSF approved, food quality H-1 oil provides protection for operating valves, bearings and slide ways in wet food applications. - More info.

WearGuard
D-A SYN FQL CSO Series (Canning/Seamer)
This premium food quality NSF approved product exceeds H-1 standards and is fully synthetic. It is engineered to meet the extreme applications such as acidic conditions, steam, and water wash downs. Specially designed to be used with canning and seaming equipment and like industry related applications. - More info.

WearGuardD-A SYN FQL PHP Lube (Peristaltic Hose Pump)
Glycerin based, food quality lubricant that meets H-1 standards for peristaltic hose pumps. Has long life properties with a wide operating temperature range and significantly reduces friction between hoses and pump shoes. - More info.


Back to top