D-A Concrete Form Oils™ are non-residual, non-staining, VOC compliant* lubricants specifically designed to prevent concrete build-up on wood and metal forms used in concrete construction. These light colored oils form a non-drying oily surface which acts to seal and separate forms from the concrete, facilitating easy removal and eliminating bug holes. These form oils resist water wash-off and add rust protection to metal forms. Field performance has demonstrated that these form oils actually have a cleansing effect on previously existing concrete residues. D-A Concrete Form Oils™ are formulated with virgin base oils and specially selected additives to impart excellent parting characteristics to concrete forms. These form oils have low pour points and contain the proper level of free fatty acid. This fatty acid reacts with the base in the concrete to neutralize and form a soap, while the remaining triglycerides act as a slip agent for the form. This formulation works very well in allowing both a physical and chemical release, as well as increasing the life of the forms. This product is free of kerosene, diesel fuel, fuel oils, waxes and resins and may be applied with a roller, brush or sprayer. For best results, these form oils should be applied to a clean, dry surface
Viscosity profiles meet the full requirements for protection and performance. Always consult your owner’s manual for proper oil viscosity and quality selection guidance.
Available in a wide range of packaging including:
|55282||55 Gallon Drum|
|55283||330 Gallon Tote|
|55288||5 Gallon Plastic Pail|